1 - 130 of about 130
Effect of forced-air cooling on the microstructure and age-hardening response of extruded Mg-Gd-Y-Zn-Zr alloy full with LPSO lamella, Journal of Materials Science & Technology, 2021/05/20, S.Z. Wu, T. Nakata, G.Z. Tang, C. Xu, X.J. Wang, X.W. Li, X.G.Qiao, M.Y. Zheng, L. Geng, S. Kamado, G.H. Fan
Achieving an ultra-high strength and moderate ductility in Mg-Gd-Y-Zn-Zr alloy via a decreased-temperature multi-directional forging, Materials Characterization, 2021/01/15, L.B. Tong, J.H. Chu, W.T. Sun, C. Xu, D.N. Zou, K.S. Wang, S. Kamado, M.Y. Zheng
Improving room-temperature stretch formability of a high-alloyed Mg-Al-Ca-Mn alloy sheet by a high-temperature solution-treatment, Materials Science and Engineering: A, 2021/01/13, T. Nakata, C. Xu, Y. Yoshida, K. Yoshida, S. Kamado
Effect of extrusion ratio and temperature on microstructures and tensile properties of extruded Mg-Gd-Y-Mn-Sc alloy, Materials Science and Engineering: A, 2021/01/07, Z. Yang, C. Xu, T. Nakata, S. Kamado
Role of Zn on the room temperature formability and strength in Mg-Al-Ca-Mn sheet alloys, Journal of Alloys and Compounds, 2020/12/20, Z.H. Li, T.T. Sasaki, M.Z. Bian, T. Nakata, Y. Yoshida, N. Kawabe, S. Kamado, K. Hono
Effect of Mg content on age-hardening response, tensile properties, and microstructures of a T5-treated thixo-cast hypoeutectic Al-Si alloy, Materials Science and Engineering: A, 2020/11/04, K. Yamamoto, M. Takahashi, Y. Kamikubo, Y. Sugiura, S. Iwasawa, T. Nakata, S. Kamado
Enhanced strength by precipitate modification in wrought Mg-Al-Ca alloy with trace Mn addition, Journal of Alloys and Compounds, 2020/09/25, Z.T. Li, X.G. Qiao, C. Xu, X.Q. Liu, S. Kamado, M.Y. Zheng
Influence of process conditions on microstructures and mechanical properties of T5-treated 357 aluminum alloys, Journal of Alloys and Compounds, 2020/09/05, K. Yamamoto, M. Takahashi, Y. Kamikubo, Y. Sugiura, S. Iwasawa, T. Nakata, S. Kamado
Development of high-performance Mg-Zn-Ca-Mn alloy via an extrusion process at relatively low temperature, Journal of Alloys and Compounds, 2020/06/05, L. B. Tong, J. H. Chu, W. T. Sun, Z. H. Jiang, D.N.Zou, K.S.Wang, S. Kamado, M.Y. Zheng
New Mg-Al based alloy sheet with good room-temperature stretch formability and tensile properties, Scripta Materialia, 2020/04/15, T. Nakata, C. Xu, H. Ohashi, Y. Yoshida, K. Yoshida, S. Kamado
Effect of Si content on microstructures, tensile properties, and creep properties in a cast Mg-6Al-0.4Mn-2Ca (wt.%) alloy, Materials Science and Engineering: A, 2020/03/03, T. Nakata, C. Xu, T. Sakai, T. Miyamoto, J. Liao, S. Kamado
Tensile creep behavior of a die-cast Mg-6Al-0.2Mn-2Ca-0.3Si (wt.%) alloy, Materials Science and Engineering: A, 2020/02/13, T. Sakai, T. Nakata, T. Miyamoto, S. Kamado, J. Liao
Improving tensile properties of a room-temperature formable and heat-treatable Mg-6Zn-0.2Ca (wt.%) alloy sheet via micro-alloying of Al and Mn, Materials Science and Engineering: A, 2020/01/20, T. Nakata, C. Xu, S. Kamado
Enhancing strength and creep resistance of Mg-Gd-Y-Zn-Zr alloy by substituting Mn for Zr, Journal of Magnesium and Alloys, 2019/09/15, C. Xu, T. Nakata, G.H. Fan, X.W. Li, G.Z. Tang, S. Kamado
Effects of extrusion ratio and temperature on the mechanical properties andmicrostructure of as-extruded Mg-Gd-Y-(Nd/Zn)-Zr alloys, Materials Science and Engineering: A , 2019/09/05, Z.J. Yu, C. Xu, J. Meng, K. Liu, J.L. Fu, S. Kamado
Unexpected influence of prismatic plate-shaped precipitates on strengths and yield anisotropy in an extruded Mg-0.3Ca-1.0In-0.1Al-0.2Mn (at.%) alloy, Scripta Materialia, 2019/08/15, T. Nakata, J.J. Bhattacharyya, S.R. Agnew, S. Kamado
Microstructure and mechanical properties of extruded Mg-Gd-Y-Zn alloy with Mn or Zr addition, Journal of Materials Science, 2019/07/15, C. Xu, T. Nakata, G.H. Fan, X.W. Li, G.Z. Tang, L. Geng, S. Kamado
Ultrahigh strength Mg-Al-Ca-Mn extrusion alloys with various aluminum contents, Journal of Alloys and Compounds, 2019/07/05, Z.T. Li, X.G. Qiao, C. Xu, S. Kamado, M.Y. Zheng, A.A. Luo
Determining the strength of GP zones in Mg alloy AXM10304, both parallel and perpendicular to the zone, Acta Materialia, 2019/06/01, J.J. Bhattacharyya, T. Sasaki, T. Nakata, K. Hono, S. Kamado, and S.R. Agnew
Ultra-fine grained Mg-Zn-Ca-Mn alloy with simultaneously improved strength and ductility processed by equal channel angular pressing, Journal of Alloys and Compounds, 2019/05/15, L.B. Tong, J.H. Chu, Z.H. Jiang, S. Kamado, M.Y. Zheng
Origin of texture weakening in a rolled ZEX4101 alloy sheet and its effect on room temperature formability and tensile property, Journal of Alloys and Compounds, 2019/04/25, T. Nakata, C. Xu, Y. Uehara, T. T. Sasaki, S. Kamado
Origins of high strength and ductility combination in a Guinier-Preston zone containing Mg-Al-Ca-Mn alloy, Scripta Materialia, 2019/04/01, J. J. Bhattacharyya, T. Nakata, S. Kamado, S. R. Agnew
Effect of Partially Substituting Ca with Mischmetal on the Microstructure and Mechanical Properties of Extruded Mg-Al-Ca-Mn-Based Alloys, Acta Metallurgica Sinica (English Letters), 2019/02/01, C. Xu, T. Nakata, G.H. Fan, K. Yamanaka, G.Z. Tang, L. Geng, S. Kamado
Bio-inspired graphene-based coatings on Mg alloy surfaces and their integrations of anti-corrosive or wearable performances, Carbon, 2019/01/15, J.H. Chu, L.B. Tong, J.B. Zhang, S. Kamado, Z.H. Jiang, H.J. Zhang, G.X. Sun
Correlation between dynamic recrystallization and formation of rare earth texture in a Mg-Zn-Gd magnesium alloy during extrusion, Scientific Reports, 2018/11/14, M.G. Jiang, C. Xu, H. Yan, S.H. Lu, T. Nakata, C.S. Lao, S. Kamado , E.H. Han
Enhancing mechanical properties of rolled Mg-Al-Ca-Mn alloy sheet by Zn addition, Materials Science and Engineering: A, 2018/11/08, T. Nakata, C. Xu, K. Suzawa, K. Yoshida, N. Kawabe, and S. Kamado
Bake-hardenable Mg-Al-Zn-Mn-Ca sheet alloy processed by twin-roll casting, Acta Materialia, 2018/10/01, M.Z. Bian, T.T. Sasaki, T. Nakata, Y. Yoshida, N. Kawabe, S. Kamado, K. Hono
Unveiling the formation of basal texture variations based on twinning and dynamic recrystallization in AZ31 magnesium alloy during extrusion, Acta Materialia, 2018/09/15, M.G. Jiang, C. Xu, H. Yan, G.H. Fan, T. Nakata, C.S. Lao, R.S. Chen, S. Kamado, E.H. Han, B.H. Lu
Effects of rolling conditions on the microstructure and mechanical properties in a Mg-Al-Ca-Mn-Zn alloy sheet, Materials Science and Engineering: A , 2018/07/11, M. Z. Bian, T. T. Sasaki, T. Nakata, S. Kamado, K. Hono
Altered ageing behaviour of a nanostructured Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion, Acta Materialia, 2018/06/01, W.T. Sun, X.G. Qiao, M.Y. Zheng, C. Xu, S. Kamado, X.J. Zhao, H.W. Chen, N. Gao, M.J. Starink
Deformation Behavior of Ultra-Strong and Ductile Mg-Gd-Y-Zn-Zr Alloy with Bimodal Microstructure, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 2018/05/15, C. Xu, G.H. Fan, T. Nakata, X. Liang, Y.Q. Chi, X.G Qiao, G.J. Cao, T.T. Zhang, M. Huang, K.S. Miao, M.Y. Zheng, S. Kamado, H.L. Xie
Alloy design for the development of heat treatable high strength Mg sheet alloy with excellent room temperature formability, Magnesium Technology 2018 (Minerals, Metals and Materials Series), 2018/03/11, B.-C. Suh, M.-Z.Bian, T. Nakata, T.T.Sasaki, S. Kamado, K. Hono
Influence of size and distribution of W phase on strength and ductility of high strength Mg-5.1Zn-3.2Y-0.4Zr-0.4Ca alloy processed by indirect extrusion, Journal of Materials Science & Technology, 2018/02/15, Hansi Jiang, Xiaoguang Qiao, Chao Xu, Shigeharu Kamado, Kun Wu, Mingyi Zheng
Microstructure evolution and mechanical properties of as-extruded Mg-Gd-Y-Zr alloy with Zn and Nd additions, Materials Science and Engineering: A, 2018/01/24, Zijian Yu, Chao Xu, Jian Meng, Xu Hu Zhang, Shigeharu Kamado
Improving mechanical properties and yield asymmetry in high-speed extrudable Mg-1.1Al-0.24Ca (wt.%) alloy by high Mn addition, Materials Science and Engineering: A, 2018/01/17, T. Nakata, C. Xu, R. Ajima, Y. Matsumoto, K. Shimizu, T. Sasaki, K. Hono, S. Kamado
The partial substitution of Y with Gd on microstructures and mechanical properties of as-cast and as-extruded Mg-10Zn-6Y-0.5Zr alloy, Materials Characterization, 2018/01/15, H.S. Jiang, X.G. Qiao, M.Y. Zheng, K. Wu, C. Xu, S. Kamado
Effects of pre-annealing on microstructure and mechanical properties of as-extruded Mg-Gd-Y-Zn-Zr alloy, Journal of Alloys and Compounds , 2017/12/30, Zijian Yu, Chao Xu, Jian Meng, Xuhu Zhang, Shigeharu Kamado
Microstructure evolution and mechanical properties of a high strength Mg-11.7Gd-4.9Y-0.3Zr (wt %) alloy prepared by pre-deformation annealing, hot extrusion and ageing, Materials Science and Engineering: A, 2017/08/04, Zijian Yu, Chao Xu, Jian Meng, Shigeharu Kamado
Evolution of microstructure and mechanical properties of an as-cast Mg-8.2Gd-3.8Y-1.0Zn-0.4Zr alloy processed by high pressure torsion, Materials Science and Engineering: A , 2017/06/17, W.T. Sun, C. Xu, X.G. Qiao, M.Y. Zheng, S. Kamado, N. Gao, M.J. Starink
Strong and ductile age-hardening Mg-Al-Ca-Mn alloy that can be extruded as fast as aluminum alloys, Acta Materialia, 2017/05/15, T. Nakata, C. Xu, R. Ajima, K. Shimizu, S. Hanaki, T.T. Sasaki, L. Ma, K. Hono, S. Kamado
Microstructure and Mechanical Properties of an Extruded Mg-1.58 Zn-0.52 Gd Alloy, Magnesium Technology 2017 (Minerals, Metals and Materials Series), 2017/02/26, M.G. Jiang, J.C. Chen, H. Yan, C. Xu, T. Nakata, S. Kamado
Enhancing strength and ductility of Mg-Zn-Gd alloy via slow-speed extrusion combined with pre-forging, Journal of Alloys and Compounds, 2017/02/15, M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen, S. Kamado
Hot compression deformation behavior of Mg-9Gd-2.9Y-1.9Zn-0.4Zr-0.2Ca (wt%) alloy, Materials Characterization, 2017/02/15, C. Xu, J.P. Pan, T. Nakata, X.G. Qiao, Y.Q. Chi, M.Y. Zheng, S. Kamado
Effect of extrusion parameters on microstructure and mechanical properties of Mg-7.5Gd-2.5Y-3.5Zn-0.9Ca-0.4Zr (wt.%) alloy, Materials Science and Engineering: A, 2017/02/08, C. Xu, T. Nakata, X.G. Qiao, H.S. Jiang, W.T. Sun, Y.C. Chi, M.Y. Zheng, S. Kamado
Effect of LPSO and SFs on microstructure evolution and mechanical properties of Mg-Gd-Y-Zn-Zr alloy, Scientific Reports, 2017/01/30, Chao Xu, Taiki Nakata, Xiaoguang Qiao, Mingyi Zheng, Kun Wu, Shigeharu Kamado
Effect of Ca/Al ratio on microstructure and mechanical properties of Mg-Al-Ca-Mn alloys, Materials Science and Engineering: A, 2017/01/13, Z.T. Li, X.D. Zhang, M.Y. Zheng, X.G. Qiao, K. Wu, C. Xu, S. Kamado
High-speed extrusion of dilute Mg-Zn-Ca-Mn alloys and its effect on microstructure, texture and mechanical properties, Materials Science and Engineering: A, 2016/12/15, M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen, S. Kamado
Enhanced corrosion and wear resistances by graphene oxide coating on the surface of Mg-Zn-Ca alloy, Carbon, 2016/11/15, L.B. Tong, J.B. Zhang, C. Xu, X. Wang, S.Y. Song, Z.H. Jiang, S. Kamado, L.R. Cheng, H.J. Zhang
Ultrahigh strength as-extruded Mg-10.3Zn-6.4Y-0.4Zr-0.5Ca alloy containing W phase, Materials & Design, 2016/10/15, H.S. Jiang, X.G. Qiao, C. Xu, M.Y. Zheng, K. Wu, S. Kamado
Optimization of Mn content for high strengths in high-speed extruded Mg-0.3Al-0.3Ca(wt.%) dilute alloy, Materials Science and Engineering: A, 2016/09/15, T. Nakata, C. Xu, Y. Matsumoto, K. Shimizu, T.T. Sasaki, K. Hono, S. Kamado
Rare earth texture and improved ductility in a Mg-Zn-Gd alloy after high-speed extrusion, Materials Science and Engineering: A, 2016/06/14, M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen, S. Kamado
Development of dilute Mg-Zn-Ca-Mn alloy with high performance via extrusion, Journal of Alloys and Compounds, 2016/05/25, M.G. Jiang, C. Xu, T. Nakata, H. Yan, R.S. Chen, S. Kamado
Effect of warm rolling on the microstructure, texture and mechanical properties of extruded Mg-Zn-Ca-Ce/La alloy, Materials Characterization, 2016/05/15, L.B. Tong, J.B. Zhang, Q.X. Zhang, Z.H. Jiang, C. Xu, S. Kamado, D.P. Zhang, J. Meng, L.R. Cheng, H.J. Zhang
Microstructure, texture and mechanical properties of extruded Mg-5Al-2Nd-0.2Mn alloy, Journal of Alloys and Compounds, 2015/12/25, J.L. Wang, Y.C. Guo, J.P. Li, Z. Yang, S. Kamado, L.M Wang
Reducing the tension-compression yield asymmetry of extruded Mg-Zn-Ca alloy via equal channel angular pressing, Journal of Magnesium and Alloys, 2015/12/15, L.B. Tong, M.Y. Zheng, S. Kamado, D.P. Zhang, J. Meng, L.R. Cheng, H.J. Zhang
Improving tensile properties of dilute Mg-0.27Al-0.13Ca-0.21Mn (at.%) alloy by low temperature high speed extrusion, Journal of Alloys and Compounds, 2015/11/05, T. Nakata, T. Mezaki, C. Xu, K. Oh-ishi, K. Shimizu, S. Hanaki, S. Kamado
Strong and ductile heat-treatable Mg-Sn-Zn-Al wrought alloys, Acta Materialia, 2015/10/15, T. Sasaki, F.R. Elsayed, T. Nakata, T. Ohkubo, S. Kamado, K. Hono
Texture weakening and ductility variation of Mg-2Zn alloy with CA or RE addition, Materials Science and Engineering: A, 2015/10/01, H.L. Ding, X.B. Shi, Y.Q. Wang, G.P. Cheng and S. Kamado
Effect of calcium addition on microstructure and texture modification of Mg rolled sheets, Transactions of Nonferrous Metals Society of China, 2015/09/15, H.-L. DING, P. ZHANG, G.-P. CHENG, S. KAMADO
Improving strength and ductility of Mg-Gd-Y-Zn-Zr alloy simultaneously via extrusion, hot rolling and ageing, Materials Science and Engineering: A, 2015/09/03, C. Xu, M.G. Zheng, S.W. Xu, K. Wu, E. Wang, G.H. Fan, S. Kamado
High-speed extrusion of heat-treatable Mg-Al-Ca-Mn dilute alloy, Scripta Materialia, 2015/05/15, T. Nakata, T. Mezaki, R. Ajima, C. Xu, K. Oh-ishi, K. Shimizu, S. Hanaki, T. T. Sasaki, K. Hono, S. Kamado
Effect of Mn content on microstructures and mechanical properties of Mg-Al-Ca-Mn alloys fabricated by high-speed extrusion, Magnesium Technology 2015, 2015/02/20, T. Nakata, K. Shimizu, Y. Matsumoto, S. Hanaki, S. Kamado
Role of Zr in the Microstructure Evolution in Mg-Zn-Zr Based Wrought Alloys, Magnesium Technology 2015, 2015/02/20, T. Bhattacharjee, T.T. Sasaki, B.C. Suh, T. Nakata, S. Kamado, N.J. Kim, K. Hono
Solute clustering and grain boundary segregation in extruded dilute Mg-Gd alloys, Scripta Materialia, 2014/12/15, J.P. Hadorn, T.T. Sasaki, T. Nakata, T. Ohkubo, S. Kamado, K. Hono
Effect of microalloyed Zr on the extruded microstructure of Mg-6.2Zn-based alloys, Scripta Materialia, 2014/11/15, T. Bhattacharjee, T. Nakata, T.T. Sasaki, S. Kamado, K. Hono
Effect of finish-rolling conditions on mechanical properties and texture characteristics of AM50 alloy sheet, Transactions of Nonferrous Metals Society of China, 2014/09/15, H.-L. Ding, Y.-W. Zhang, S. Kamado
Fatigue Behavior of Extruded Mg-Al-Ca-Mn Alloy with T6 Treatment at Elevated Temperature, Key Engineering Materials, 2014/09/15
Development of a High Strength Ductile Wrought Mg-Zn Based Alloy, Magnesium Technology 2014, 2014/02/18, Lan Ma, Taisuke Sasaki, Taiki Nakata, Tadakatsu Ohkubo, Kazuhiro Hono, Shigeharu Kamado
Significant Precipitation Strengthening in Extruded Mg-Sn-Zn Alloys, Magnesium Technology 2014, 2014/02/18, Taisuke Sasaki, Fady Refaat Elsayed, Taiki Nakata, Shigeharu Kamado, Tadakatsu Ohkubo, Kazuhiro Hono
Room and elevated temperature mechanical properties in the as-extruded Mg-Al-Ca-Mn alloys, Materials Science and Engineering: A , 2012/03/30, T. Homma, S. Hirawatari, H. Sunohara, S. Kamado
Microsturctures and mechanical properties of as-cast and hot-rolled Mg-8.43Li-0.353Ymm (Y-riched mischmetal) alloy, Metallurgical and Materials Transactions A, 2012/02/15, H. Dong, S.W. Xu, L. Wang, S. Kamado, L. Wang
Unexpected influence of Mn addition on the creep properties of a cast Mg-2Al-3Ca (mass%) alloy, Acta Materialia, 2011/12/15, T. Homma, S. Nakawaki, K. Oh-ishi, K. Hono, S. Kamado
Twins, recrystallization and texture evolution of a Mg-5.99Zn-1.76Ca-0.35Mn (wt.%) alloy during indirect extrusion process, Scripta Materialia, 2011/11/15, S.W. Xu, K. Oh-ishi, S. Kamado, T. Homma
Microstructure and Mechanical Properties of Extruded Mg-8Gd-2Y-1Nd-0.3Zn-0.6Zr Alloy, Materials Science and Engineering: A , 2011/09/25, X. Hou, Z. Cao, L. Wang, S. Xu, S. Kamado, L. Wang
High-strength extruded Mg-Al-Ca-Mn alloy, Scripta Materialia, 2011/08/15, S.W. Xu, K. Oh-ishi, S. Kamado, F. Uchida, T. Homma, K. Hono
Dynamic microstructural changes during hot extrusion and mechanical properties of a Mg-5.0 Zn-0.9 Y-0.16 Zr (wt.%) alloy, Materials Science and Engineering: A , 2011/05/15, S.W. Xu, M.Y. Zheng, S. Kamado, K. Wu, G.J. Wang, X.Y. Lv
Dissimilar joining of Al/Mg light metals by compound casting process, Journal of Materials Science , 2011/05/07, E. Hajjari, M. Divandari, S. H. Razavi, S. M. Emami, T. Homma, S. Kamado
Effect of Mn addition on microstructure, texture and mechanical properties of Mg-Zn-Ca alloy, Materials Science and Engineering: A , 2011/04/25, L.B. Tong, M.Y. Zheng, S.W. Xu, S. Kamado, Y.Z. Du, X.S. Hu, K. Wu, W.M. Gan, H.G. Brokmeier, G.J. Wang, X.Y. Lv
Improvement of the mechanical properties of Mg-Gd-Y-Zn alloy castings by grain refinement, IOP Conf. Series: Materials Science and Engineering, 2011/04/04
Effect of homogenization on microstructures and mechanical properties of hot compressed Mg-9Al-1Zn alloy "jointly-worked", Materials Science and Engineering A, 2011/03/15, S.W. Xu, S. Kamado, T. Honma
Estimation of the transient interfacial heat flux between substrate/melt at the initiation of magnesium solidification on aluminum substrates using the lumped capacitance method "jointly-worked", Applied Surface Science, 2011/03/15, E. Hajjari, M. Divandari, S.H. Razavi, S.M. Emami, S. Kamado
Twins, shear bands and recrystallization of a Mg-2%Zn-0.8%Gd alloy during rolling (jointly worked), Scripta Materialia, 2011/01/15, H. Yan, S.W. Xu, R.S. Chen, S. Kamado, T. Honma, E.H. Han
Improvement in creep property of a cast Mg-6Al-3Ca alloy by Mn addition (jointly worked), Scripta Materialia, 2010/12/15, T. Homma, S. Nakawaki, S. Kamado
Microstructure and Mechanical properties of extruded Mg-Zn-Ca alloy (jointly worked), Materials Science Forum, 2010/08/25, M.Y. Zheng, L.B. Tong, S.W. Xu, X.S. Hu, K.Wu, S. Kamado
Recrystallization mechanism and the relationship between grain size and Zener-Hollomon parameter of Mg-Al-Zn-Ca alloys during hot compression (jointly worked), Scripta Materialia, 2010/08/15, S.W. Xu, S. Kamado, N. Matsumoto, T. Honma, Y. Kojima
Microstructure and mechanical properties of extruded Mg-6.5Gd-1.3Nd-0.7Y-0.3Zn alloy (jointly worked), Transactions of Nonferrous Metals Society of China, 2010/07/15, X.-L. Hou, Z.-Y. Cao, L.-L. Zhang, D.-Q. Fang, S.-W. Xu, S. Kamado, L.-M. Wang
Influence of ECAP routes on microstructure and mechanical properties of Mg-Zn-Ca alloy (jointly worked), Materials Science and Engineering A, 2010/06/25, L.B. Tong, M.Y. Zheng, X.S. Hu, K.Wu, S.W. Xu, S. Kamado, Y. Kojima
Microstructure characteristics during the multi-pass hot rolling and their effect on the mechanical properties of AM50 magnesium alloy sheet (jointly worked), Materials Science and Engineering A, 2010/06/15, H. Ding, K. Hirai, S. Kamado
Effect of Zr addition on the mechanical properties of as-extruded Mg-Zn-Ca-Zr alloys (jointly worked), Materials Science and Engineering A, 2010/04/15, T. Homma, C. L. Mendis, K. Hono, S. Kamado
Numerical simulation for microstructure evolution in AM50 Mg alloy during hot rolling "jointly worked", Computational Materials Science, 2010/02/15, H. Ding, K. Hirai, T. Homma, S. Kamado
Microstructure and Compression Properties of Al-Si Alloy Foams by Spark Plasma Sintering Technique "jointly worked", Materials Science Forum, 2010/01/15, N. Aoyagi1, S. Kamado and Y. Kojima
An upgrade recycling from Mg alloy chips toward superconducting MgB2 via powder processing "jointly worked", Journal of Ceramic Processing Research, 2009/12/25, M. Nanko, D. Maruoka, H. Ozawa, S. Kamado, H. Abe, A. Kondo and M. Naito
Recrystallization mechanism of as-cast AZ91 magnesium alloy during hot compressive deformation "jointly worked", Materials Science and Engineering A, 2009/12/15, S.W. Xu, S. Kamado, N. Matsumoto, T. Honma and Y. Kojima
Bimodally grained microstructure development during hot extrusion of Mg-2.4Zn-0.1Ag-0.1Ca-0.16Zr (at.%) alloy "jointly worked", Acta Materialia, 2009/10/25, K. Oh-ishi, C.L. Mendis, T. Homma, S. Kamado, T. Ohkubo and K. Hono
Effect of Mg17Al12 precipitates on the microstructural changes and mechanical properties of hot compressed AZ91 magnesium alloy "jointly worked", Materials Science and Engineering A, 2009/10/15, S.W. Xu, N. Matsumoto, K. Yamamoto, S. Kamado, T. Honma and Y. Kojima
Microstructure and mechanical properties of Mg-Zn-Ca alloy processed by Equal Channel Angular Pressing "jointly worked", Materials Science and Engineering A, 2009/10/15, L.B. Tong, M.Y. Zheng, H. Chang, X.S. Hu, K. Wu, S.W. Xu, S. Kamado and Y. Kojima
Structure and Mechanical Properties of Extruded Mg-Gd Based Alloy Sheet "jointly worked", Materials Science and Engineering A, 2009/09/15, X. Hou, Q. Peng, Z. Cao, S. Xu, S. Kamado, L. Wang, Y. Wu and L. Wang
Enhanced age-hardening and formation of plate precipitates in Mg-Gd-Ag alloys "Jointly worked", Scripta Materialia, 2009/09/01, K. Yamada, H. Hoshikawa, S. Maki, T. Ozaki, Y. Kuroki, S. Kamado and Y. Kojima
Fabrication of extraordinary high-strength magnesium alloy by hot extrusion "Jointly worked", Scripta Materialia, 2009/09/01, T. Homma, N. Kunito, S. Kamado
Effect of pre-aging treatment on microstructure and mechanical properties of hot compressed Mg-9Al-1Zn alloy "jointly worked", Materials Science and Engineering A, 2009/08/20, S.W. Xu, N. Matsumoto, K. Yamamoto, S. Kamado, T. Honma and Y. Kojima
Dynamic microstructural changes in Mg-9Al-1Zn alloy during hot compression "Jointly worked", Scripta Materialia, 2009/08/01, S.W. Xu, N. Matsumoto, S. Kamado, T. Honma and Y. Kojima
High temperature tensile properties of as-cast Mg-Al-Ca alloys "jointly worked", Materials Science and Engineering A, 2009/05/25, S.W. Xu, N. Matsumoto, K. Yamamoto, S. Kamado, T. Honma and Y. Kojima
Synthesis of high-strength magnesium alloy composites reinforced with Si-coated carbon nanofibres "jointly worked", Scripta Materialia, 2009/03/15, T. Honma, K. Nagai, A. Katou, K. Arai, M. Suganuma and S. Kamado
Precipitation-hardenable Mg-2.4Zn-0.1Ag-0.1Ca-0.16Zr (at%) wrought magnesium alloy "jointly worked", Acta Materialia, 2009/02/01, C. L. Mendis, K. Oh-ishi, Y. Kawamura, T. Honma, S. Kamado and K. Hono
FEM analysis for hot rolling process of AM60 alloy "jointly worked", Transactions of Nonferrous Metals Society of China, 2009/01/15, H. Ding, N. Kanamori, T. Honma, S. Kamado and Y. Kojima
Mechanical properties of newly developed age hardenable Mg-3.2mol%Gd-0.5mol%Zn casting alloy "jointly worked", Materials Transactions, 2008/10/01, T. Ozaki, Y. Kuroki, K. Yamada H. Hoshikawa, S. Kamado and Y. Kojima
Compressive behavior of ultrafine-grained Mg-Zn-Y-Zr alloy containing quasicrystalline phase "jointly worked", Materials Science Forum, 2008/09/01, M. Y. Zheng, S. W. Xu, W. M. Gan, K. Wu, S. Kamado, Y. Kojima, H. G. Brokmeier
Compressive deformation of Mg-Zn-Y-Zr alloy processed by equal channel angular pressing "jointly worked", Materials Science and Engineering A, 2008/06/15, M. Y. Zheng, S. W. Xu, X.G. Qiao, K. Wu, S. Kamado and Y. Kojima
Study of the microstructure, texture and tensile properties of as-extruded AZ91 magnesium alloy "jointly worked", Journal of Alloys and Compounds, 2008/05/29, H. Ding, L. Liu, S. Kamado, W. Ding, Y. Kojima
Experimentally and Numerically Study on Deep Drawing Process for AZ31 and AZ52 rolled Sheet at Elevated Temperatures "jointly worked", Materials Transactions, 2008/05/01, D. V. Hai, S. Itoh, T. Sakai, S. Kamado and Y. Kojima
Hot compression behavior of AZ91 alloy(I) - EBSP analysis, Chinese Journal of Nonferrous Metals, 2008/02/15, Liu L.-F., Ding H.-L., Kamado S., Ding W.-J., Kojima Y.
Hot compression behavior of AZ91 alloy(II) - Cellular automata simulation, Chinese Journal of Nonferrous Metals, 2008/02/15, Liu L.-F., Ding H.-L., Kamado S., Ding W.-J., Kojima Y.
Hot compression behavior of AZ91 alloy(III) - Recrystallization kinetics based on cellular automata simulation, Chinese Journal of Nonferrous Metals, 2008/02/15, Liu L.-F., Ding H.-L., Kamado S., Ding W.-J., Kojima Y.
HRTEM Observation of Precipitates at Early Stage of Aging in Mg-Gd-Zr Alloy, Materials Science Forum, 2007/10/02, T. Kawabata, T. Matsuno, K. Matsuda, S. Kamado, Y. Kojima, S. Ikeno
Superplasticity of Mg-Zn-Y-Zr Alloy containing quasicrystal phase Processed by Equal Channel Angular Pressing, Materials Letters, 2007/09/15, M.Y. Zheng, S.W. Xu, X.G. Qiao, K. Wu, S. Kamado and Y. Kojima
Microstructure and tensile properties of Mg-Zn-Y-Zr alloy containing quasicrystal phase processed by equal channel angular pressing, Key Engineering Materials, 2007/09/10, S. W. Xu, M. Y. Zheng, X.G. Qiao, W. M. Gan, K. Wu, S. Kamado and Y. Kojima
Effect of Zn additions on the age hardening of Mg-2.0Gd-1.2Y-0.2Zr alloys, Acta Materialia, 2007/05/29, T. Honma, T. Ohkubo, S. Kamado, and K. Hono
HRTEM Observation of Age Hardening Precipitates in Mg-8.3%Gd-3.7%Y -0.76%Zr Alloy, Materials Transactions, 2007/05/01, T. Kawabata, Y. Fukuda, K. Matsuda, S. Kamado, Y. Kojima and S. Ikeno
Evolution of microstructure and texture of AZ91 alloy during hot compression, Materials Science and Engineering: A, 2007/04/15, H. Ding, L. Liu, S. Kamado, W. Ding and Y. Kojima
HRTEM Observation of the Precipitates in Heat-Resistant Mg-Gd-Y-Zr Alloy, Materials Science Forum, 2007/03/15, T. Kawabata, Y. Fukuda, K. Matsuda, S. Kamado, Y. Kojima, S. Ikeno
Mechanical Properties and Damping Behavior of Magnesium Alloys Processed by Equal Channel Angular Pressing, Materials Science Forum, 2007/03/15, M.Y. Zheng, X.S. Hu, S.W. Xu, X.G. Qiao, K. Wu, S. Kamado, Y. Kojima
Alloy development of High toughness Mg-Gd-Y-Zn-Zr alloys, Materials Transactions, 2006/04/01, K. Yamada, Y. Okubo, M. Shiono, H. Watanabe, S. Kamado and Y. Kojima
Finite Element Simulation of Sheet Forming Process for Magnesium Wrought Alloys, Advanced Materials Research, 2006/02/15, D.V. Hai, S. Itoh, S. Kamado and Y. Kojima
HRTEM observation of the age hardening precipitatesin Mg-15wt%Gd-Zr alloy, Advnced Materials Research, 2006/02/15, T. Matsuno, T. Kawabata, K. Matsuda, S. Kamado, Y.Kojima and S.Ikeno
Precipitate Microstructures of High Strength Mg-Gd-Y-Zn-Zr Alloys, Advanced Materials Research, 2006/02/15, K. Yamada, Y. Okubo, S. Kamado and Y. Kojima
Equal Channel Angular Pressing of Magnesium Alloy Containing Quasicrystal Phase "jointly worked", Mater. Sci. Forum, 2006/01/01, M.Y. Zheng, S.W. Xu, X.G. Qiao, K. Wu, S. Kamado, Y. Kojima, H. G. Brokmeier
Effects of Al and Zn contents and heat treatment on microstructures and tensile properties of Mg-Al-Zn alloys, Journal of Institute of Light Metals, 2005/10/01, Yoshida, Y., Arai, K., Itoh, S., Kamado, S., Wada, T., Matsunaga, T., Yoshimoto, T., Kojima, Y.
Improvement in surface properties of extrusions from Mg-Al-Zn based alloy machined chips, Journal of Institute of Light Metals, 2005/10/01, Aida, T., Takatsuji, N., Matsuki, K., Ohara, T., Kamado, S.
Effect of hot extrusion on microstructure and mechanical properties of quasicrystal-reinforced Mg-Zn-Y alloy"jointly worked", Transactions of Nonferrous Metals Society of China, 2005/04/01, M.Y. Zheng, X.G. Qiao, S.W. Xu, W.M. Gan, K. Wu, S. Kamado, Y. Kojima, H.G. Brokmeier
In-situ quasicrystal-reinforced magnesium matrix composite processed by equal- channel- angular- extrusion (ECAE) "jointly worked", Journal of Materials Science, 2005/04/01, M.Y. Zheng, X.G. Qiao, S.W. Xu, K. Wu, S. Kamado and Y. Kojima
Page: [<<PREV] [1] [NEXT>>]
Copyright © 2007 Nagaoka University of Technology, All Rights Reserved.